There are various data services to your car FM station. In that one which is to be mentioned is the HD radio which is the most famous data service and digital audio available in the market. These all can be delivered by our own FM stations. Installation of this HD radio is very important. The first unit that is to be installed is the head units. This unit is generally fixed directly in the factory premises. In this the radio by itself is connected to the unit of head. These provides as much controls to the radio. But how to hook up un HD radio to your car?

This article will list all the things that are required to install a HD radio and also the proper procedure to install the same to your car. Installing a HD radio to your car is simple thing to do and you need not search for an engineer or a mechanic to do this work. By doing this work on your own you can save your time and your money. The things that are required are the radio and an electrical tape. Make sure you have an electrical insulation tape of good quality to be in safer side.

Electrical tape is very important while doing this process as it is very essential for insulation or any other kind of taping purpose as it is one of the most important step of safety measures in process. The initial step to be done is to remove the car battery’s negative terminal from it. The reason for this is also the same. as it is one of the most important step of safety measures in process.

Next, take the black colored wire from the lead set consisting of black as well as yellow wires. This black wire is then connected to the chassis of the car. A clean surface is chosen with no paint on it. There are some pieces that already come with wiring set. This can also be used. Then, yellow lead is connected to the twelve volt supply which is constant. This yellow lead had a fuse inline.

Then, the cable which is also known as IP-BUS cable is connected with blue connector, to multi CD player if present. This cable is then connected to head unit. It is connected to blue connector which is found on this head unit. This connector on the radio is actually black in colour.

A cable called the IP – BUS cable is connected with the cable. This is a blue converter. The other end of this is connected to the other end of the head unit. If there is a multi player then one can even fix it to that. The black color in the HD radio indicates the connector’s presence.

The radio is then mounted at a location that is convenient. They are provided with fasteners of the hook loop type. With the help of these fasteners, fix this unit with the carpet below the seat. Since the unit is operated and controlled from its head unit, the access to the radio is not very important. After the above connections are done the car battery is reconnected and the fixed radio is tested.

Hence this article teaches how to hook up an HD radio to your car.

In this article we will discuss How to Program a Pioneer Radio. Car stereo from Pioneer company is known for its best quality of music that can be enjoyed while we are on drive. These days there are many attractive play stations. So one may like to tune to these stations. So this article assumes grater importance in guiding us through the steps needed to complete this job of learning to program the car radio of Pioneer. As Pioneer is a leading brand we can take this as a standard for other models. The procedure mostly remains the same for all other brands.

This article will guide you to program the Pioneer radio system easily and quickly. This article also lists the things that are required to program it. Once the radio station is programmed, you need not search for a radio station to listen to songs or news. You can simply press the buttons on the radio system to switch between the radio stations.

The programming work has to be done in a screen called preset screen. This screen is brought to view by pressing the list key. This key is provided on the stereo’s front side. The next step is to set the stations that you need. These stations are set with the help of a scroll called multi-control. This is also provided in the system.

We don’t need any special things to do this job. All that we require is car stereo . This programming of radio is so easy that any one can learn it without any expert understanding by just following the five simple steps given in this article.

In the first step there is one option called ‘list’ present in the stereo of the car at its front side. As we press this ,a preset screen can be seen.

Stop turning the scroll wheel when you find the radio station which has to be saved. Now, push and hold any of the numbers from one to six on the front of the radio. The station name will flash on the display screen as you hold the number key. Once the flashing of the station name stops release the button. The radio station is fixed in this number.

The radio can be operated to listen to these stations after the display is switched over to the normal screen. This can be done by clicking the BAND button. It may be given as ESC also. It will be provided in the system.

Now its time to get back to our original display screen . So we should just press the escape button present in the stereo of the car in front side. Sometimes band button can also make us come back to our original display. Refer Pioneer manual for car audio systems in order to find if there are any other extra options and some other useful tips and suggestions for this programming job. Thus in this article we have got very useful information on How to Program a Pioneer Radio in easy steps and without the useful of expensive complicated tools.

Depth of the music is very important for all those who are all music enthusiasts. They also aim at giving a powerful music and equally good sound. So they are more interested in developing such a stereo. The high range of music is generally handled by the speakers at the rear decks, door panels and at the dash. A sub woofer is no substitute for a device which can handle lower ranges which also separate a audio system and stock system. As far as an audio professional is considered he can handle the job of installing sub woofer to your system. Even an individual can try doing it. But how to install a sub woofer in a factory stereo?

There are few tools required for accomplishment of this task. The usage of such tools will reduce the man power required and makes it easy. It includes trim panel removals, Philips head screw driver, speaker wires.

The negative cable from the car’s battery is removed initially. The battery’s negative terminal is actually connected with the negative cable and to the car’s frame. The cable’s clamp is loosened with the use of a Philips screw driver. The clamp is removed and it is kept aside until the task is accomplished.

Then the amplifier position is located after which the manual is gone through for any kind of procedure to be followed. The woofer can be placed either in the cargo area at the rear back or the car’s trunk in the case of models like hatch backs or SUV. The speakers are then connected to the output corresponding to each input.

Fourth step is very important. The speaker wires should be connected with the positive and negative terminals of the amps correctly. The next step needs some attention. The wires of the speaker should be routed to the place where sub woofers are present. Suppose if the location of sub woofers is not near the amplifier then wires can be taken under the carpet of the vehicle. Use trim panel removal tool for prying of panels at the openings of the door. The trim panels can be replaced by hand itself after laying the wires under the carpet.

The carpets are lifted and the wires are routed through this. Hiding the wires gives a custom look and avoids clumsy look. The trim panels are replaced manually. To fit them properly, pressure must be applied uniformly through out the panel’s length.

After that is done we come to the last step. This seventh step is nothing but reconnecting the ground cable with the vehicle battery’s negative terminal. Fix the clamp on the lead and use the same Philip screw driver which we used for loosening now to tighten the clamp of the cable. Before starting to do this job always make sure if the output from the amplifier can be handled by the sub woofer added.

Knowing how to install a sub woofer in a factory stereo is of great importance in maintaining a car.